P0211 Fault Code

P0211 OBD-II Trouble Code Short Description

Cylinder 11 Injector Circuit Malfunction

What does trouble code P0211 mean?

The P0211 fault code is a generic powertrain code that indicates a problem with the fuel injection pump control circuit. This code is typically seen on diesel engines and can cause a variety of driveability issues, such as difficulty starting, rough idle, and reduced power output.

The most common cause of the P0211 code is a malfunctioning fuel injection pump or fuel injector module driver. Other possible causes include a faulty fuel pressure regulator, damaged wiring, or a failed engine control module (ECM).

To diagnose and repair the P0211 code, a mechanic will typically perform a series of tests to determine the root cause of the issue. This may involve checking fuel pressure and flow rates, inspecting electrical connections and wiring, and performing diagnostic scans on the ECM.

Depending on the cause of the P0211 code, the recommended solution may range from replacing a faulty component to repairing damaged wiring or reprogramming the engine control module. In some cases, multiple repairs may be necessary to fully resolve the issue and prevent it from recurring in the future.

Overall, the P0211 fault code is a serious issue that can significantly impact the performance and reliability of a vehicle. As such, it's important to take prompt action to diagnose and repair any underlying issues as soon as possible to avoid further damage and ensure the vehicle remains safe and operable.


What are the symptoms of the P0211 code?

The P0211 fault code refers to the fuel injection pump malfunction on diesel engines. The symptoms may include:

  1. Hard starting or no start
  2. Decreased fuel efficiency
  3. Poor engine performance
  4. Engine stalling or hesitation
  5. Rough idling or engine misfire
  6. Illuminated Check Engine light or other warning lights
  7. Reduced engine power or acceleration
  8. Excessive smoke from the exhaust

If you experience any of these symptoms, it is recommended to have your vehicle diagnosed and repaired by a qualified mechanic to avoid potential damage to the engine.


What causes the P0211 code?

P0211 is a fault code that is associated with diesel engines. It is specifically related to the fuel injector circuit, more specifically, the injector control circuit for cylinder 1. There are a number of potential causes for this fault code to appear, including:

  1. Faulty fuel injectors: If the fuel injectors are not functioning properly, this can cause the injector control circuit to fail, which can produce the P0211 fault code.

  2. Wiring issues: Faulty wiring connections, damaged wiring, or corroded wiring can also cause the injector control circuit to fail and trigger the P0211 code.

  3. Faulty injector control module: The injector control module is responsible for controlling the amount of fuel that goes into the engine. If this module is faulty, or has failed, it can produce the P0211 error code.

  4. Faulty fuel pressure regulator: If the fuel pressure regulator is failing, it can cause the fuel pressure to be too high or too low, which can trigger the P0211 code.

  5. Dirty fuel filter: If the fuel filter is clogged with dirt and debris, it can reduce the flow of fuel to the engine and cause the injector control circuit to fail.

If you are experiencing the P0211 fault code on your vehicle, it is important to have it diagnosed and repaired as soon as possible to prevent any further damage to the engine.

Possible Solutions

How to fix P0211?

If your car's diagnostic scanner shows fault code P0211, it means there is a problem with the fuel injector control circuit. Here are some steps you can take to fix it:

  1. Check the wiring: Look for any loose or damaged wires in the fuel injector circuit. Make sure they are properly connected and repair or replace any damaged wires.

  2. Check the fuel injector: A faulty fuel injector can cause the P0211 code. Check the resistance of the fuel injector using a multimeter. If it’s out of specification, replace it.

  3. Check the fuel pump: Test the fuel pump by turning the key to the “On” position, but without starting the engine. You should hear the fuel pump running briefly, which is a sign that it’s working. If you don’t hear the fuel pump, it could be faulty and needs replacing.

  4. Check the fuel pressure regulator: Inspect the fuel pressure regulator and test it with a vacuum gauge. If it fails the test, replace it.

  5. Check the fuel system for clogs: A clogged fuel filter or a blocked fuel line can also cause the P0211 code. Try replacing the fuel filter and inspect the fuel line for any blockages.

If none of these steps work, it's best to take your car to a professional mechanic for a more thorough diagnosis.


  • What is P0211?

    P0211 is a diagnostic trouble code (DTC) in the Powertrain Control Module (PCM) that indicates a fault in the engine over-revving condition.

  • What causes P0211?

    P0211 can be caused by a variety of reasons, including a malfunctioning engine control module (ECM), a faulty throttle position sensor, a damaged throttle body, or a faulty fuel injection system.

  • What are the symptoms of P0211?

    The most common symptoms of P0211 include engine misfires, reduced engine power, increased fuel consumption, and the activation of the check engine light.

  • Can I still drive my vehicle with a P0211 code?

    It is not recommended to drive your vehicle with a P0211 code as it can lead to serious engine damage and safety hazards, such as the engine overheating and internal components being damaged.

  • How do I fix P0211?

    The specific repair procedure for P0211 will vary depending on the cause of the issue. However, common fixes include replacing the malfunctioning components, such as the ECM, throttle position sensor, or fuel injection system, and performing a thorough inspection of the engine for any other issues.

  • What is the cost of repairing P0211?

    The cost to repair P0211 will depend on the cause of the issue and the specific repairs needed. On average, repairs can cost anywhere from $200 to $1,000 or more.

  • How can I prevent P0211 from occurring?

    To prevent P0211 from occurring, it is important to regularly maintain your vehicle, including performing routine engine inspections and tune-ups, replacing any faulty components promptly, and using high-quality fuel and oils.

  • Can I clear the P0211 code myself?

    Yes, you can clear the P0211 code yourself using an OBD-II scanner. However, it is important to note that clearing the code will not fix the underlying issue causing the code to appear, and the code will likely reappear if the issue is not repaired.