P0073 Code: Ambient Temperature Sensor and Circuit Checks
Contents
P0073 identifies an ambient air temperature sensor circuit-high fault. Check the vehicle-specific wiring and software information before replacing a sensor: manufacturer bulletins describe several different reasons this code can appear.
Vehicles reporting P0073. Ford, Jeep and Chrysler bulletin examples apply only to their named models, build dates and markets. Electrical thresholds and repair procedures require exact vehicle service information.
Do not probe circuits, dismantle mirrors or program control modules without the correct equipment and service procedure. Follow serious dashboard warnings independently of P0073; no safe driving-distance allowance is implied.
What circuit high means
The word high describes the electrical signal classification, not a hot day. Ford's 2015 gasoline OBD summary, page 190, describes an ambient-air temperature circuit check with voltage limits. Those limits belong to the systems documented there; they are not a universal specification for testing every car.
Ambient air means the air outside the vehicle. It is a different measurement from intake-air temperature, which is involved in P0113. Read the complete code and module identification before ordering either sensor.
An incorrect outside-temperature display can be a useful observation, but the displayed number alone does not establish the failed part. Record what the display shows, whether it changes, and any accompanying warning messages while the vehicle is parked.
Three manufacturer examples that change the diagnosis
These bulletins illustrate different repair paths. They are not a ranking of the most common causes, and a matching code does not make every vehicle eligible for the same repair.
- Ford sensor and wiring example: TSB 26-2251 concerns North American 2023-2025 F-Super Duty trucks built on or before 14 June 2025. Its repair applies only when the specified workshop pinpoint test leads to ambient-sensor replacement. The work then includes the sensor, wiring pigtail, bezel and mirror cover. If that test does not lead to replacement, Ford directs normal diagnosis instead.
- Jeep software example: 08-007-22 covers the 2021 WK Grand Cherokee in North America, APAC, LATAM and EMEA. It describes a BCM reporting P0073 for a short-to-ground condition that should have been reported as P0072. The bulletin specifies a software update. On an affected vehicle, interpreting the word high without checking the actual circuit and software can send the diagnosis in the wrong direction.
- Chrysler connection example: 08-175-22 addresses water intrusion and connector corrosion on North American 2022 RU Pacificas built on or before 25 April 2022. P0073 is among the possible codes. The prescribed work concerns sealing a harness ground area, rather than automatically replacing the ambient sensor.
Ask the repairer to check current service information against the VIN and build date. An older bulletin can explain a known issue without proving that its repair is appropriate today.
What you can check without dismantling the car
Start with a useful record rather than a replacement part:
- Save the complete scan report, including any other codes and the module that reported them.
- Photograph the outside-temperature reading and warning messages while parked.
- Note when the concern began and any recent mirror, bodywork or electrical repairs. This is background for diagnosis, not proof that the earlier work caused the fault.
- Give the workshop the model year, VIN, build date if available, and details of any previous attempted repair.
Avoid pulling apart a mirror or probing wiring based on a generic sensor-location picture. The Ford repair above requires vehicle-specific removal and wiring procedures, and its bulletin explicitly assigns the work to trained technicians. A repairer should explain which measurement or inspection supports the proposed work.
Resetting the code and deciding what to do next
Erasing P0073 does not perform the Jeep software update or repair the Chrysler sealing concern. Clearing a code and completing the manufacturer's repair procedure are separate actions. After the repair, ask how the workshop will verify the result, including any required learned-value reset or follow-up scan.
If P0073 is the only concern and the vehicle otherwise behaves normally, arrange diagnosis and ask the repairer about use of your particular vehicle. The code alone cannot establish a safe driving distance. Treat an overheating warning, impaired visibility or another serious operating problem separately: stop safely where necessary and follow the vehicle's warning instructions rather than assuming everything is explained by the outside-temperature sensor.
Frequently asked questions
Is the ambient sensor always inside a door mirror?
No universal location follows from P0073. Ford's cited 2026 truck repair involves the right exterior mirror, while its older OBD summary describes a driver-side mirror location as typical for the systems discussed. Use the exact model documentation instead of transferring either location to another vehicle.
Does a service bulletin mean the repair will be free?
Not necessarily. Ford 26-2251 states that the bulletin does not change warranty limits or policies. Ask the dealer to check your VIN and applicable coverage before authorizing work.
Does the Pacifica document describe a current recall?
It is a technical bulletin that was also issued as a time-limited Rapid Service Update. That is not evidence of a current recall or current coverage for your vehicle; ask the dealer to check its present VIN-specific status.
Check the original documents
Sources
- Ford 2015 gasoline OBD summary
Page 190: ambient-air temperature circuit monitoring and voltage limits for the documented systems.
- Ford TSB 26-2251, May 2026
Pages 1-3: scoped F-Super Duty diagnosis, conditional repair and post-repair learned-value reset.
- Jeep bulletin 08-007-22, January 2022
Pages 1-2: 2021 WK Grand Cherokee BCM misreporting and software update.
- Chrysler bulletin 08-175-22, September 2022
Pages 1-3: scoped 2022 Pacifica water intrusion, connector corrosion and sealing procedure.
Sources checked on 2026-11-03. Follow the instructions for your exact model.

