Bosch Dishwasher E09: Meaning and Safe Next Steps
Bosch US support describes E09 as a heat-pump internal-heater fault. Check the exact model and regional instructions before choosing a next step.
Enter a code on its own or add the brand, such as Bosch E15 or LG OE.
Bosch US support describes E09 as a heat-pump internal-heater fault. Check the exact model and regional instructions before choosing a next step.
P0102 means the mass airflow circuit input is below its expected limit. Preserve the scan, check for visible connection problems and confirm the cause before replacing the MAF sensor.
P0340 reports a camshaft position sensor circuit fault. The sensor, its wiring and vehicle-specific diagnostic conditions need checking before a replacement is justified.
P0101 concerns mass-airflow range or performance. Check the engine-specific diagnosis before cleaning or replacing the MAF sensor.
Samsung 5C or 5E means water is not draining properly. Check the accessible hose and use the correct residual-water procedure before filter cleaning.
P0455 is a large-leak EVAP monitor result. Check the vehicle’s filler instructions and have the sealed system diagnosed before replacing parts.
On LG front-load washers, dE points to a door that did not lock. dE1 and dE2 distinguish a closure problem from a door that is closed but not locked.
P0299 reports underboost. Check the engine-specific diagnostic path before assuming the turbocharger needs replacing.
Samsung SUD or 5UD means excessive foam was detected. Let the washer handle the pause, then review the detergent type and measured dose.