Samsung Washer dC Code: Door or Unbalanced Load?
A Samsung washer dC code can refer to the door or an unbalanced load. Use the model manual to choose the right checks before assuming a part has failed.
Match the brand and the code on your washer or dishwasher. Check that the guide covers your model before following any steps.
A Samsung washer dC code can refer to the door or an unbalanced load. Use the model manual to choose the right checks before assuming a part has failed.
LG tE concerns temperature sensing or heating control. Check the exact display and model instructions, then seek service if the warning persists.
Bosch E23 points to a drain-pump problem. Preserve the exact code and contact support rather than assuming filter cleaning or a new pump will fix it.
LG PE points to water-level sensing. Use the restart instructions for the exact washer and arrange service if the warning returns.
Samsung LC is a water-level or leakage warning. Look for visible water safely, check the exact model and avoid assuming the sensor needs replacing.
LG FE is an overfill warning. Stop if water is escaping and use the exact model instructions before restarting or opening a drain filter.
Samsung UE or Ub indicates an unbalanced load. Redistribute the laundry safely, check the cycle and confirm that the washer is stable.
Bosch US support describes E09 as a heat-pump internal-heater fault. Check the exact model and regional instructions before choosing a next step.
Samsung 5C or 5E means water is not draining properly. Check the accessible hose and use the correct residual-water procedure before filter cleaning.